What this work looks like done right
Some spaces never got ductwork and never will: the garage workshop, the converted lanai, the addition the last owner built, the back bedroom that runs five degrees hot. A ductless mini-split conditions exactly that space, at high efficiency, without tearing the house open for duct runs.
Installation quality decides everything with mini-splits. The line set has to be flared right, the vacuum pulled deep, the condensate routed where Florida humidity cannot turn it into a wall stain, and the head placed where the air actually throws. We install single-zone units and multi-head systems that can condition a whole older home.
Sizing matters as much as placement. An oversized head short-cycles and leaves the room damp; an undersized one runs flat out and dies young. The room gets measured, the load gets figured, and the equipment gets matched to the actual space, with the price stated before the work begins.
- Single-zone installs for garages and additions
- Multi-head systems for whole-home zoning
- Proper flares, deep vacuum, factory-spec charge
- Condensate routed to survive Florida humidity
- All major mini-split brands installed
- Straight prices before scheduling, always
Three steps, no surprises
Size the space
Room dimensions, sun load and how the space gets used set the equipment size.
Place it right
Head location picked for air throw and drainage, line set routed clean and short.
Commission by the numbers
Vacuum verified, charge weighed in, heating and cooling modes both proven before sign-off.
Related work we handle
Every service carries the same 100% satisfaction guarantee, the same 24/7 phone, and the same rule about telling you the price before the work. The complete list lives on the services page. See finished jobs in the work gallery, or read what customers say on the reviews page.
Get a Straight PriceWhy this work is different in Florida
The calendar out here only pretends to have four seasons. Cooling season opens in April, peaks through the long furnace of July and August, and does not truly close until Thanksgiving. Afternoon thunderstorms spend the summer taking potshots at capacitors and control boards, power blinks stress compressors, and the humidity works on every gasket and coil the whole time. Then a January front drops the mornings into the thirties for a week, and the heating side gets asked to wake up from an eight-month nap and perform immediately. Equipment that gets professional attention twice a year handles this rhythm for a dozen years or more. Equipment that gets ignored fails on the hottest Saturday of July, because that is when the load peaks and the weak part finally quits.
How pricing works
Pricing here works one way: you hear the number before the work happens. Service calls get quoted when you book. Repairs get diagnosed, then priced, then approved by you before a wrench turns. Replacements come as two or three clear options with honest operating cost differences, not a single take-it-or-leave-it figure engineered around a commission. The word customers keep using in reviews is honest, and that is the entire strategy: an owner-run company in a small market lives or dies on whether the last customer would call again, so every price has to survive being repeated to your neighbor.
The owner-run difference
Owner-run means something specific here. The person who answers the midnight call, quotes the price and stands behind the guarantee is the same person whose name is on the truck. There is no call center reading a script, no commissioned closer arriving after the technician softens you up, and no corporate playbook that treats a repair visit as a sales lead. Twenty years of hands-on work set the standard; four years of running the company on referrals have proven it pays.
Brands, parts and honest recommendations
On the equipment side, Rheem and Trane are the factory relationships, which means preferred access to units, parts and technical support when your job needs them. On the repair side, brand loyalty means nothing: Carrier, Goodman, Lennox, Daikin, York, Ruud, Amana and the rest of what Florida installs are everyday work, and regional parts availability for all of them keeps repair turnarounds short. The recommendation you get is driven by what fits the house and the budget, never by whatever box a distributor wants moved this month.
Before the truck arrives
Want the visit to go faster? Three things help. First, note what the system is doing and when it started: sounds, smells, warm air, water where it should not be. Second, check the breaker panel and the filter before calling, because a tripped breaker or a suffocated filter solves a surprising share of calls on the phone, free. Third, clear a path to the equipment, indoor and out. None of it is required, but customers who do it tend to have their answer, and their cool air, sooner.
Questions we hear about this
Straight answers about ductless mini-split installation from the crew that does it every week. If your question is not here, call 561-339-5729 for a direct answer, day or night.
What does a mini-split cost to run?
Less than you expect. Inverter-driven mini-splits are the most efficient cooling most homes can buy, and conditioning one room beats dropping the whole house two degrees to fix one hot space. You will get realistic operating numbers for your situation.
Do mini-splits heat too?
Yes. Every unit we install is a heat pump, so the same head that cools the garage in August warms it on the January mornings Florida pretends it is winter.
One big unit or several heads?
Depends on the layout. Two singles sometimes beat one multi-head on both cost and redundancy; sometimes the multi wins clean. You get both configurations priced straight so the trade-off is visible.
Can a mini-split handle a Florida garage?
That is one of its best jobs here, with two caveats: the unit must be sized for an uninsulated space, and the door seals matter. We size for the garage as it actually is, and tell you plainly if insulation should come first.
Will the wall unit be loud?
No. Modern heads run quieter than a refrigerator. The compressor sits outside, and proper installation keeps vibration out of the wall.
Ready when you are
Ductless Mini-Split Installation handled by an owner-run crew that answers its phone. Okeechobee to the coast, 24 hours a day.
Schedule a Visit