What this work looks like done right
A heat pump is the right answer for most Florida homes, and it is not close. One system carries the cooling load eleven months a year, then flips to heating for the January mornings in the forties, at efficiency electric strips cannot approach. When customers ask what we would put in our own houses, this is usually it.
Sizing discipline matters even more with heat pumps than straight AC, because the same machine has to be honest in both directions. The load calculation sets the tonnage, the ductwork gets verified, and backup heat strips get sized for the real cold-snap need instead of oversized into a power bill trap.
Rheem and Trane heat pumps go in most often here, commissioned properly: pressure test, deep vacuum, factory charge, airflow verified, and both modes proven before sign-off. You see the numbers, and the 100% satisfaction guarantee stands behind the work.
- Full heat pump system installs and changeouts
- Load-based sizing for both modes
- Backup heat strips sized honestly
- Rheem and Trane factory relationships
- Defrost and thermostat settings dialed for Florida
- Permits, inspections and disposal included
Three steps, no surprises
Size for both seasons
Cooling dominates here, but the heating math still gets done right.
Choose from straight options
Configurations priced plainly, with realistic operating cost differences.
Commission both modes
Cooling and heating proven with measured numbers before the truck leaves.
Related work we handle
Need something this page does not cover? The full lineup is on the services page, from ductwork to refrigeration. Photos of real installs and repairs sit in the work gallery, and the reviews page collects what customers have said about Brian and the work.
Get a Straight PriceWhy this work is different in Florida
In this climate, a dead air conditioner is more than an inconvenience. When the afternoon heat index climbs past a hundred, a closed-up house can get dangerous for babies, older relatives and pets within hours. That is why no-cool calls get priority and why the phone is answered 24/7. It is also the best argument against waiting on a system that is already making new noises or struggling to keep up in the afternoons. Those are warnings, and in the hottest stretch of the year the gap between a warning and a breakdown can be short.
How pricing works
Replacement is where most pricing games get played in this trade, so it is where we keep things plainest. You get two or three options side by side: what each one costs to install, what it should cost to run through a long summer, and why one fits your house better than the others. Sometimes the right answer is the modest unit, and you will hear that. There is no salesman on commission shaping the menu and no pressure to sign tonight. Take the options home, compare them, call with questions. What you approve is what shows up on the invoice.
The owner-run difference
Owner-run means something specific here. The person who answers the midnight call, quotes the price and stands behind the guarantee is the same person whose name is on the truck. There is no call center reading a script, no commissioned closer arriving after the technician softens you up, and no corporate playbook that treats a repair visit as a sales lead. Twenty years of hands-on work set the standard; four years of running the company on referrals have proven it pays.
Brands, parts and honest recommendations
Being a Rheem and Trane partner brings factory support and quick access to their units and parts. It does not decide what goes in your house. If the system you already own is a Goodman or a Lennox with good years left, the advice is to repair it. If a modest unit fits the load better than a premium one, that is the one you hear about first. Customers have written that they were sold the less expensive option because it made more sense for them. That is how an equipment relationship ought to work.
Before the truck arrives
A word on what not to do while you wait. Do not keep resetting a breaker that trips again; that is the system telling you something. Do not chip ice off a frozen coil; switch the system to fan only and let it thaw. Do not pour anything down the drain line. What does help: swapping out a filled-up filter, clearing room around the equipment, and noting what you saw and heard. Those few steps keep a small problem from growing and give the technician a clean start.
Questions we hear about this
Straight answers about heat pump installation from the crew that does it every week. If your question is not here, call 561-339-5729 for a direct answer, day or night.
Is a heat pump better than AC plus heat strips?
For most homes here, clearly. Strips turn electricity straight into heat; a heat pump moves heat instead, which does the same job for a fraction of the power on our mild winters. Strips stay as backup, not as the plan.
Do heat pumps work in Florida humidity?
They are built for it, and a right-sized heat pump dehumidifies well in cooling mode. The Florida-specific details live in the installation: coil protection, condensate routing and charge set to spec.
What is that steam coming off the unit in winter?
Defrost mode, and it is normal. The outdoor coil frosts on cold damp mornings, the unit clears itself, and it goes back to heating. If it defrosts constantly or ices solid, that is when to call.
How long do heat pumps last here?
Florida run hours are heavy, so ten to fifteen years is the honest range with maintenance. Neglect the coils and the number shrinks. Twice-a-year service protects the investment.
Can a heat pump replace my old AC and air handler?
Usually, and that is the most common changeout we do. The line set and electrical get evaluated, ducts checked, and the swap is typically one day of work.
Ready when you are
Heat Pump Installation handled by an owner-run crew that answers its phone. Okeechobee to the coast, 24 hours a day.
Schedule a Visit